Simple, plug-in installation – Tazer JL Lite simply plugs in, in place of your SGW module. Supports 2018+ Wrangler JL
There are two sets of features – those that program the vehicle to accommodate modifications made to the Jeep, and the “live” features that run only when the Tazer JL Lite remains plugged in.
These are all accessed using the dash display, using steering wheel buttons to navigate the menus.
Settings – once the Tazer is “married” to the Jeep, the following menus can be accessed. Unmarrying the Tazer JL Lite will bring the settings back to stock.
Adjust for alternate tire sizes up to 41″
Adjust for alternate axle gear ratios
Adjust for an alternate transfer case LO range ratio
Disable TPMS system if desired
Change front/rear TPMS warning PSI limit
Live features – these run only while the tazer is plugged in:
Light shows: Can be accessed from the key fob or from the on-screen menu. 6 pre-set light shows and 3 make-your-own shows included. Set from the factory to only operate when parked, but can be unlocked for off-road and emergency personnel use.
Auto StopStart Disable – can be set to disable AutoStopStart upon vehicle start-up
AutoPark Disable – can override the AutoPark system
Cooldown mode – run engine fans when Jeep is off, to aid in cooldown
Winch mode – raise engine idle to 2000 RPM while winching or jumping another vehicle
Clear Check engine light
Can be upgraded any time via USB by purchasing an activation key, to the full Tazer JL/Tazer JL Mini feature set.
Free USB updates – certainly more to come!