Home » Tazer Temp Page

Tazer Temp Page

To Download the latest firmware for the TAZER, Download Z Automotive Programming utility here!

Version 2.3.2

  • Correction to TPMS on some cars you could disable it, but not re-enable it (usually specific to 2017 cars)
  • Drive Mode Settings: Updated there are now 3 settings -ScatPack-SRT-OFF
  • Clear CEL fixed
  • Module Reboot – This feature allows the reset the key modules in the vehicle
  • One step reset – Once configurations are done. Select firmware version and it’ll reset radio for current configurations to get loaded
  • 2.3.1 – 06/05/17: Added remapped custom/sport/track drive modes for 16/17 scat packs.

2.3.0 – 06/02/17:

  • Added cooldown mode for Hellcat – fan only, IC pump only, or both with fans low or high
  • improved fan control to go past the 4-minute limit
  • decreased fan and light show low battery threshold from 11.0V to 10.8V
  • A fix for invoking sport mode in base model 15-17

2.2.9 – 03/13/17:

  • Added engine fan control for Hellcat
  • Changed TPMS to 3 versions; NONE, BASE, and PREMIUM, so either type of system can be disabled
  • Change Drive Mode setting so it’ isn’t combined with the ECO screen button; better for 2017’s
  • Changed ECO setting so it enables the function itself and the radio button; better for 2017’s
  • Added SWS (steering wheel shifting) back on for NAG1’s – accidentally removed this in 2.2.8
  • Added 0-30, 0-60 times for Jeep Grand Cherokees – the non- Srt’s can now have the timers in the dash like the Durango’s
  • Sped up the response time when scrolling through the Tazer setup menu
  • Fixed the light show from latching up if the custom light shows are uninitialized
  • Automatically disables the custom light shows if they’re not programmed to do anything
  • Corrected the remap function for those with ACC so they only remap when ACC is off (was Durango only in 2.2.7/8)

2.2.8 – 12/14/16:

  • Added the button remapping (same options as the aux buttons) for the SPORT button
  • Added ability to turn TPMS on and off in tazer setup menu
  • Added ability to change DRL type(US/Canada/none) and which lights to use
  • Added ability to turn engine fans on demand when ignition on, engine off (right arrow and cruise cancel)
  • Fixed light show selection so it loops correctly using whichever are enabled in ZPU
  • Added button press to exit the setup menu (left button + cruise right)
  • Code clean-up

2.2.7 – 11/02/16:

Now 3 custom light shows, added support for ZPU 1.4.7 for configuration of the 3 shows, save/load from file, exclude shows, etc.

  • Added Launch as an option for the aux/ACC button remapping
  • Corrected some Durango light show stuff
  • ACC button remapping only live when ACC is off

2.2.6 – 10/05/16:

  • Added a method to reset the system in case of a dash/shifter non-shut down after a config change (left/cruise on/off while on firmware screen)
  • Changed the custom light shows, made 2 and they’re more configurable
  • sped up the light shows
  • Added mappable buttons for the ACC buttons or “aux” button set. As of now, they’re always live. Will make them de-activate when ACC is on in a future release.

2.2.5 – 08/16/16:

Functionally the same as 2.2.4, but fixes an issue where changing settings in the settings menu too quickly can result in a configuration corruption.

2.2.4 – 07/07/16:

Fixed in-motion nav for pre-2015’s. Corrected an issue where screen would go black in reverse when in-motion nav was enabled

  • Fixed Scat/SRT steering setting for Charger scat packs that are enabling SRT modes
  • Improved video support
  • Added Eco mode
  • Added EVIC splash screen selection
  • Added light show quick-enable
  • Added custom show ability (show 7)
  • Added light show starting show selection in ZPU

2.2.2 – 04/05/16:

  • Added In Motion Nav (live feature) for 2011-2016
  • Added Video select – backup cam, VES in, Aux in (requires video to be wired in) (RA3/4 only)
  • video select from EVIC screen or by double-tapping MUTE
  • Added CD/DVD button to radio as an audio source to go with the video (RA3/4 only)
  • Added Seat belt ding disable/enable
  • Changed radio reset after config change; so settings take effect quicker
  • Added Scat Pack/SRT steering modes (so that Scat Pack owners can get SRT’s track steering)

2.2.0 – 11/09/15:

  • Added a 6th light show
  • Fixed an ESP on/off looping issue after using line lock on 2011-2014 Charger/300
  • Removed “FullDIM” option
  • Added “FogDrop” option, to allow fog lights to remain on when hi beams in use

2.1.9 – 09/24/15:

  • Added light show from keyfob
  • Added dash turn indicators to the light show, so that if you’re in the car you can tell if it’s on!!
  • Changed Line Lock implementation to release quicker when releasing button during burnout
  • Make Traction Control go to “sport” after using line lock
  • Add sport mode to 2015’s that don’t come with sport mode (press ESP off and Back at the same time)
  • Added DrvTrans option for 2015’s that don’t have transmission sport setting in the performance pages
  • Changed the EVIC menu so that 2015-only setting won’t show up in 2011-2014
  • Removed NavInMo from 2011-2013 as the car doesn’t support that function (either does 2015 at the moment)
  • Added a load of code for capturing vehicle config files – works only with ZPU 1.3.9
  • Fixed sleep function for proper shutdown

2.1.8 – 09/17/15:

  • Added support for new ZPU 1.3.7 for detecting it’s a tazer or tranzformer,
  • Added light show configuration menu in ZPU
  • Fixed button presses so Auto upshift RPM and shift firmness can be set by steering wheel buttons

2.1.7 – 08/27/15:

  • Added 5 new light shows
  • Fixed light shows so they turn off properly
  • Fixed sleep function so it stays awake on USB for updates
  • Added Jeep and Durango support
  • Added new ZPU capabilities framework

2.1.6 – 07/17/15:

  • Mostly new features for 2015’s, but the light show will work on all 2011+
  • Added: DRL Dropout Disable
  • Add Drive Modes
  • Add Super Track Pak
  • Add Rear Camera Grid Lines
  • Add Factory Shift Light
  • New LightShow feature

2.1.5 – 06/17/15:

  • Combined support for 2011-14 and 2015 Charger/challenger.
  • Changed line lock to 2 buttons to activate.
  • Added force AWD to RWD or AWD.
  • Made line lock keep traction control at bay until car stops once a burnout starts.
  • Added FullDim mode (Interior lights can be turned off fully when you dial the dimmer knob all the way down).
  • Made the menus a little smarter, so they don’t show 0-30/0-60 in 2012+ since sport pages have that, and force AWD only shows for AWD cars.

2.1.4 – 06/11/15:

Added 2015 Challenger Line Lock. Has not been tested on 2011-2014, and brings nothing new to those. (line lock didn’t work on 2011-2014 in this version)

2.1.3 – 05/24/15:

  • Added Enable Fog lights
  • Enable BAckup Camera
  • Enable InMotion Nav
  • Enable sport mode for 8 speed
  • Enable Line Lock in Drive

2.1.1 – 02/13/15:

  • Added Full ESP on/off
  • Line Lock
  • SRT performance page unlock (2012-2014)
  • Sport Mode unlock (2012-2014)
  • Paddle shifter enable (2012-2014)
  • SRT EVIC pages unlock (2012-2014)
  • other improvements and bug fixes

2.0.3 – 01/12/15:

Fixed issue on some cars where ESP button twice wasn’t turning tranzformer shift kit function on/off

2.0.1 – 06/27/14:

Original release.